File Manager

X7ROOT File Manager

Current Path: /opt/golang/1.19.4/src/cmd/compile/internal/ssa

opt / golang / 1.19.4 / src / cmd / compile / internal / ssa /

📁 ..
📄 README.md(8.14 KB)
📄 TODO(950 B)
📄 addressingmodes.go(23.64 KB)
📄 bench_test.go(531 B)
📄 biasedsparsemap.go(2.71 KB)
📄 block.go(11.1 KB)
📄 branchelim.go(11.98 KB)
📄 branchelim_test.go(5.21 KB)
📄 cache.go(2.46 KB)
📄 check.go(16.59 KB)
📄 checkbce.go(956 B)
📄 compile.go(18.19 KB)
📄 config.go(11.7 KB)
📄 copyelim.go(1.83 KB)
📄 copyelim_test.go(1.29 KB)
📄 critical.go(3.19 KB)
📄 cse.go(9.43 KB)
📄 cse_test.go(4.25 KB)
📄 deadcode.go(9.61 KB)
📄 deadcode_test.go(3.49 KB)
📄 deadstore.go(9.08 KB)
📄 deadstore_test.go(4.09 KB)
📄 debug.go(56.34 KB)
📄 debug_lines_test.go(8.29 KB)
📄 debug_test.go(28.75 KB)
📄 decompose.go(13.41 KB)
📄 dom.go(7.98 KB)
📄 dom_test.go(13.34 KB)
📄 expand_calls.go(63.5 KB)
📄 export_test.go(3.23 KB)
📄 flagalloc.go(6.68 KB)
📄 flags_amd64_test.s(533 B)
📄 flags_arm64_test.s(699 B)
📄 flags_test.go(2.49 KB)
📄 func.go(27.08 KB)
📄 func_test.go(13.07 KB)
📄 fuse.go(6.5 KB)
📄 fuse_branchredirect.go(3.24 KB)
📄 fuse_comparisons.go(4.04 KB)
📄 fuse_test.go(7.21 KB)
📁 gen
📄 html.go(34.72 KB)
📄 id.go(576 B)
📄 layout.go(4.82 KB)
📄 lca.go(3.77 KB)
📄 lca_test.go(1.65 KB)
📄 likelyadjust.go(15.24 KB)
📄 location.go(3.06 KB)
📄 loopbce.go(10.54 KB)
📄 loopreschedchecks.go(15.86 KB)
📄 looprotate.go(2.61 KB)
📄 lower.go(1.36 KB)
📄 magic.go(15.77 KB)
📄 magic_test.go(9.1 KB)
📄 nilcheck.go(11.06 KB)
📄 nilcheck_test.go(12.17 KB)
📄 numberlines.go(7.83 KB)
📄 op.go(18.65 KB)
📄 opGen.go(1.01 MB)
📄 opt.go(308 B)
📄 passbm_test.go(3.14 KB)
📄 phielim.go(1.48 KB)
📄 phiopt.go(8.08 KB)
📄 poset.go(37.2 KB)
📄 poset_test.go(18.14 KB)
📄 print.go(3.85 KB)
📄 prove.go(41.82 KB)
📄 regalloc.go(83.69 KB)
📄 regalloc_test.go(6.49 KB)
📄 rewrite.go(53.49 KB)
📄 rewrite386.go(289.01 KB)
📄 rewrite386splitload.go(4.05 KB)
📄 rewriteAMD64.go(888.95 KB)
📄 rewriteAMD64splitload.go(21.41 KB)
📄 rewriteARM.go(487.7 KB)
📄 rewriteARM64.go(751.84 KB)
📄 rewriteCond_test.go(10.62 KB)
📄 rewriteLOONG64.go(193.44 KB)
📄 rewriteMIPS.go(174.44 KB)
📄 rewriteMIPS64.go(195.55 KB)
📄 rewritePPC64.go(431.6 KB)
📄 rewriteRISCV64.go(159.66 KB)
📄 rewriteS390X.go(433.4 KB)
📄 rewriteWasm.go(109.86 KB)
📄 rewrite_test.go(6.91 KB)
📄 rewritedec.go(10.16 KB)
📄 rewritedec64.go(63.77 KB)
📄 rewritegeneric.go(617.96 KB)
📄 schedule.go(18.23 KB)
📄 schedule_test.go(2.91 KB)
📄 shift_test.go(4.05 KB)
📄 shortcircuit.go(12.63 KB)
📄 shortcircuit_test.go(1.31 KB)
📄 sizeof_test.go(855 B)
📄 softfloat.go(1.99 KB)
📄 sparsemap.go(1.98 KB)
📄 sparseset.go(1.54 KB)
📄 sparsetree.go(8.05 KB)
📄 stackalloc.go(12.79 KB)
📄 stackframe.go(290 B)
📄 stmtlines_test.go(2.96 KB)
📁 testdata
📄 tighten.go(4.3 KB)
📄 trim.go(4.24 KB)
📄 tuple.go(1.97 KB)
📄 value.go(15.21 KB)
📄 writebarrier.go(19.29 KB)
📄 writebarrier_test.go(1.75 KB)
📄 xposmap.go(3.29 KB)
📄 zcse.go(2.07 KB)
📄 zeroextension_test.go(1.66 KB)

Editing: looprotate.go

// Copyright 2017 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.

package ssa

// loopRotate converts loops with a check-loop-condition-at-beginning
// to loops with a check-loop-condition-at-end.
// This helps loops avoid extra unnecessary jumps.
//
//	 loop:
//	   CMPQ ...
//	   JGE exit
//	   ...
//	   JMP loop
//	 exit:
//
//	  JMP entry
//	loop:
//	  ...
//	entry:
//	  CMPQ ...
//	  JLT loop
func loopRotate(f *Func) {
	loopnest := f.loopnest()
	if loopnest.hasIrreducible {
		return
	}
	if len(loopnest.loops) == 0 {
		return
	}

idToIdx := make([]int, f.NumBlocks())
	for i, b := range f.Blocks {
		idToIdx[b.ID] = i
	}

// Set of blocks we're moving, by ID.
	move := map[ID]struct{}{}

// Map from block ID to the moving blocks that should
	// come right after it.
	after := map[ID][]*Block{}

// Check each loop header and decide if we want to move it.
	for _, loop := range loopnest.loops {
		b := loop.header
		var p *Block // b's in-loop predecessor
		for _, e := range b.Preds {
			if e.b.Kind != BlockPlain {
				continue
			}
			if loopnest.b2l[e.b.ID] != loop {
				continue
			}
			p = e.b
		}
		if p == nil || p == b {
			continue
		}
		after[p.ID] = []*Block{b}
		for {
			nextIdx := idToIdx[b.ID] + 1
			if nextIdx >= len(f.Blocks) { // reached end of function (maybe impossible?)
				break
			}
			nextb := f.Blocks[nextIdx]
			if nextb == p { // original loop predecessor is next
				break
			}
			if loopnest.b2l[nextb.ID] == loop {
				after[p.ID] = append(after[p.ID], nextb)
			}
			b = nextb
		}
		// Swap b and p so that we'll handle p before b when moving blocks.
		f.Blocks[idToIdx[loop.header.ID]] = p
		f.Blocks[idToIdx[p.ID]] = loop.header
		idToIdx[loop.header.ID], idToIdx[p.ID] = idToIdx[p.ID], idToIdx[loop.header.ID]

// Place b after p.
		for _, b := range after[p.ID] {
			move[b.ID] = struct{}{}
		}
	}

// Move blocks to their destinations in a single pass.
	// We rely here on the fact that loop headers must come
	// before the rest of the loop.  And that relies on the
	// fact that we only identify reducible loops.
	j := 0
	// Some blocks that are not part of a loop may be placed
	// between loop blocks. In order to avoid these blocks from
	// being overwritten, use a temporary slice.
	newOrder := make([]*Block, 0, f.NumBlocks())
	for _, b := range f.Blocks {
		if _, ok := move[b.ID]; ok {
			continue
		}
		newOrder = append(newOrder, b)
		j++
		for _, a := range after[b.ID] {
			newOrder = append(newOrder, a)
			j++
		}
	}
	if j != len(f.Blocks) {
		f.Fatalf("bad reordering in looprotate")
	}
	f.Blocks = newOrder
}

X7ROOT File Manager

Editing: looprotate.go

Upload File

Create Folder